
ALPHA~NODE Hub Notes:
www.AlphaNodeHub.com
Below are the recommended tools I use for tightening the adapters in the hub.
Tool List:
3/16” Allen Key – for set screws (supplied with each hub)
1” (25mm) Deep Socket – for 5/8-24 1” large nut
.75” (19mm) Deep Socket – for smaller 5/8-24 retaining nuts
6” (150mm) Crescent Wrench – for tightening NMO connectors
Available Adapters:
3/8-24 threaded adapter to SO239
2” SO239 F to SO239 F connector
NMO to SO239 Female connector
NMO to N Female connector
Adapter for mounting two hubs for use as a Discone or Biconical dipole.
Diamond Antenna - DIA3824: SO-239 to 3/8x24
3/8-24 adapters for mounting whips, .100”, .125”, .150”, .200”, .250”
I prefer the adapters with hex screws for tightening the whips in place.
I also prefer that the whip hole goes completely through the adapter.
This allows for more adjustment range when tuning an antenna.
I replace the smaller nut on the 5/8-24 threaded connecters with a
larger 1” nut and star washer. This creates a more robust fastening
against the hub.
Komentarze do niniejszej Instrukcji